GEJLUK AIR RIFLE MODIFICATION
Here I will explain the gejluk air rifle modification from the standard air rifle into a dual power switch so that it can be charged with PCP pump. The modification of dual power switch is very helpful for users in charging compressed air on air rifles. This rifle is a term that is often used for open valve hammer knock rifle. The term gejluk (javanese) appears because the method of pumping is done in a way or shake it.
This type of rifle is very suitable for hunting and keeping crops from pets that are relatively large in size like wild boar. As a result of its strong power and accuracy. Besides its power and accuracy this rifle also has a downside of the number of pumps that are not small. To produce good power and accuracy this rifle must be pumped hundreds of times. Depending on the tube size spesifications attached to the rifle shotgun. In a rifle that uses wind tube with a diameter of more than 19mm the pump must be given more than 300x. From that we share about gejluk air rifle modification.
Sometimes the massive number of pumping cause exhausted and bored. Well, you don’t need to worry anymore because right now the air rifle can be modified and added to PCP for charging using a PCP pump. Using PCP pump in compressed air charging is intended to make the filling process faster and save more time. Gejluk air rifle modification to dual power components is done to add the PCP nipple component to the shotgun rifle so that it can be used for two charging ways. Filling the manual pump on the rifle and filling the PCP pump.
The following components must be prepared. The size of the components is adjusted to gun shot tube you had. You can make the components yourself from brass material lathe as in my drawing. But if you are too busy to make it yourself, you may order it to me. . This is a comprehensive scheme for modifying dual power.