How to add air rifle power ?
Gejluk air rifles a million user rifles that have great power compared to hand pump rifles. The system used in the air rifles the same as the system used in the PCP air rifle. By using knock open valve system, the wind pressure stored can be transforred as needed. In addition, with this system, the air rifle can be used for several shots as long as there is sufficient pressure. Though the power of the air rifle is big. There are still many air rifle lovers who want to increase their rifle power from a standard power. On this post, I will discuss how to add air rifle power or upgrade gun rifle’s power in a simple way without changing the pipe contruction on a shock gun.
The first modification is by replacing the spring with a harder one. Because the harder the spring strain, the longer the needle valve opens. The needle valve is a connecting valve between the wind storage and transfer space to the barrel. So the longer the opening step is the more wind will be transferred. The amount of wind transferred to the barrel will affect the power of a rifle. Power on the air rifle wil be comparable to the accuracy that is obtained. So that the greater the power is, the mode accurate the shot will be. But it’s not the only one reason that affects accuracy. Barrel can also affect accuracy distance.
The first way to add rifle power above is very easy to practice, isn’t it ?. Because we do not need to completely dismantle the component of the rifle and can be done when the gun contains wind pressure.
Then the second way to add rifle power is by replacing valve spring with a softer spring. What is clear is the opposite of the first way. With a softer spring it is intended to prolong the opening valve. However, I suggest that it should not be too soft to avoid breaking up. For the second way, the condition of the air rifle tube must be empty from pressure.